Keo UV 9-911-REV-B

Multi-Cure® 9-911-REV-B is a UV/Visible light curing, high-tensile-strength adhesive for rapid tacking of repair wires on printed circuit boards.  The product has excellent adhesion to a wide variety of PCB materials as well as common wire jackets. The instant, “on-demand” cure is ideal for manual wire-tacking applications where precise placement is critical to achieving optimal performance. Faster UV fixture time results in increased throughput and less work in progress. It is specially formulated to cure with heat in applications where shadow areas exist.

Solvent-resistant 9-911-REV-B is one part, so no mixing is required. The material exhibits high bond strength to circuit board components as well as lead frame and is also compatible with Dymax conformal coatings. After cure, the product fluoresces bright blue for simple or automated visual inspection systems.

Dymax materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures.

This product is in full compliance with the RoHS Directives 2002/95/EC and 2003/11EC.

xem thêm keo uv

(+84) 983.912.259 Zalo Email
Mô tả


  • UV/Visible light cure
  • Secondary heat cure
  • High viscosity for optimal coverage of wires
  • One part, no mixing required
  • Faster UV fixture time
  • Solvent resistant


Property Values
Viscosity (nominal) 25,000 cP
Uncured appearance Clear translucent gel
Recommended substrates Lead Frame; PCB
Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Keo UV 9-911-REV-B”