Keo UV 9008

Dymax 9008 is engineered for chip encapsulation on flex circuits cures upon exposure to UV/Visible light and is designed for rapid chip encapsulation in chip-on-board or chip-on-flex printed circuit board applications. Dymax 9008 encapsulant forms flexible, highly moisture-resistant bonds to diverse surfaces such as polyimide (Kapton), DAP, glass, epoxy board, metal, and PET. 9008 remains flexible to -40°C, making it ideal for COF applications. It is engineered for chip encapsulation on flex circuits. This product is thixotropic, allowing for easy formation of a protective encapsulant layer. It has a low dielectric constant for high-frequency applications. This encapsulating material may be used in attaching FPCs to various substrates including PCB and glass.

Dymax materials have no solvents added and cure upon exposure to light. Their ability to cure in seconds results in lower processing costs. When cured with Dymax UV light curing spot lamps, focused beam lamps, flood lamps, or conveyor systems they deliver optimum speed and performance for maximum efficiency. Dymax lamps offer the optimum balance of UV and visible light for the fastest, deepest cures.

This product is in full compliance with the RoHS2 Directives 2015/863/EU.

xem thêm keo uv

(+84) 983.912.259 Zalo Email
Mô tả


  • Cures with UV/Visible light
  • Remains flexible at low temperatures ( to -40C°)
  • Highly moisture resistant
  • Low VOC
  • Thixotropic for precise dispensing on ICs
  • One part formulation – no mixing
  • Low dielectric constant for high frequency applications
  • Low modulus for minimal stress
  • Halogen free
  • Isocyanate free
  • No solvents added


Property Values
Viscosity (nominal) 4,500 cP
Cured appearance Clear
Recommended substrates FR4, Kapton, Ceramic, Glass
Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Keo UV 9008”