Máy sấy keo UV ECE 2000

Máy sấy keo UV ECE 2000 cung cấp khả năng sấy khô cường độ từ trung bình đến cao trên diện tích 8 inch x 8 inch (20,3 cm x 20,3 cm), máy sấy keo uv xử lý nhanh các chất kết dính, lớp phủ và mực có thể sấy khô bằng tia cực tím (UV).

(+84) 983.912.259 Zalo Email
Mô tả

Features

  • Powerful UV light-curing lamps (up to 105 mW/cm²)*
  • Standard systems contain a metal halide bulb (longwave), but two additional bulb options (shortwave and visible) are available for order
  • 100% shielding with safety interlock
  • Easy-to-adjust tray height
  • Shutter that can be actuated by foot pedal or PLC
  • Bulbs are warranted for 2,000 hours**
  • Lamp turn-off when the Light Shield door is open
  • Containment of non-passive lamp failure
  • Reduced light leakage with the new ECE Light Shield design
  • Redesigned mounting plate for the ZIP Shutter reduces light leakage
  • *Measured with Dymax ACCU-CAL 50 Radiometer (325-395 nm) at a lamp height of 3 in (7.62 cm) using a standard metal halide bulb.
  • **Warranty covers bulb ignition only. Intensity is not warranted.

Specifications

Property Specifications
Typical Initial Output Intensity at UVA (365 nm)** 105 mW/cm²
Curing Area 8 in x 8 in (20.3 cm x 20.3 cm)
Working Distance 2 in – 6 in (5.08 cm – 15.24 cm)
Reflector Housing Dimensions 9 in L x 10.5 in W x 7.5 in H (22.9 cm x 26.7 cm x 19.1 cm)
Power Supply Dimensions 12 in L x 16 in W x 4.25 in H (30.5 cm x 40.6 cm x 10.8 cm)
Bulb Warranty 2,000 hours (no intensity warranty, only bulb ignition)
Typical Degradation < 20% over 2,000 hours
Power Requirements 100 – 240 VAC +/-10% Single Phase 47 – 63 Hz
Operating Environment 10-40°C
0-80% non-condensing
** Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer
Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Máy sấy keo UV ECE 2000”