Máy sấy keo UV ECE 5000

Máy sấy keo UV ECE 5000 cung cấp khả năng xử lý cường độ từ trung bình đến cao trên diện tích 5 inch x 5 inch (12,7 cm x 12,7 cm), máy sấy keo uv dùng để sấy khô nhanh các chất kết dính, lớp phủ, keo, mực bằng bóng đèn UV halogen loại 400 Watt.

(+84) 983.912.259 Zalo Email
Mô tả


  • Powerful UV light-curing lamps (up to 225 mW/cm²)*
  • Standard systems contain a metal halide bulb (longwave), but two additional bulb options (shortwave and visible) are available for order
  • 100% shielding with safety interlock
  • Easy-to-adjust tray height
  • Shutter that can be actuated by foot pedal or PLC
  • Bulbs are warranted for 2,000 hours**
  • Lamp turn-off when the Light Shield door is open
  • Containment of non-passive lamp failure
  • Reduced light leakage with the new ECE Light Shield design
  • Redesigned mounting plate for the ZIP Shutter reduces light leakage
  • *Measured with Dymax ACCU-CAL 50 Radiometer (325-395 nm) at a lamp height of 3 in (7.62 cm) using a standard metal halide bulb.
  • **Warranty covers bulb ignition only. Intensity is not warranted.


Property Specifications
Typical Initial Output Intensity at UVA (365 nm)** 225 mW/cm²
Curing Area 5 in x 5 in (12.7 cm x 12.7 cm)
Working Distance 2 in – 6 in (5.08 cm – 15.24 cm)
Reflector Housing Dimensions 6 in L x 6.75 in W x 8 in H (17.2 cm x 17.2 cm x 20.3 cm)
Power Supply Dimensions 12 in L x 16 in W x 4.25 in H (30.5 cm x 40.6 cm x 10.8 cm)
Bulb Warranty 2,000 hours (no intensity warranty, only bulb ignition)
Typical Degradation < 20% over 2,000 hours
Power Requirements 100 – 240 VAC +/-10% Single Phase 47 – 63 Hz
Operating Environment 10-40°C
0-80% non-condensing
** Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer
Đánh giá (0)

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Máy sấy keo UV ECE 5000”